In my previous post, I forgot to address the issue of setting a DCC address (pun intended) to the Piko G1206 VFLI.
Since it is a Piko decoder, it cannot be programmed by the ESU LokProgrammer. The documentation for the Piko decoder and sound module can be found here:
I tried to use the ECoS to read the address from CV1, but it would return an error:
For the Piko decoder, it is important to use the program track:
To set the address to 744, I will use this previous post:
- Compute CVs 17 & 18 with https://www.digitrax.com/support/cv/calculators/
- Write CV17 = 194 and CV18 = 232 (previous values were 195 & 233)
- Write CV 29 = 46 (previous value was 14)
With the documentation, I only need to adjust the icons as follow:
