How to open a BB 27000 or BB 37000 from Mehano

 

Here's the video:

I finally got around to create this video on opening a BB 27000 or BB 37000 from Mehano. I followed the instructions to take the engine apart:

1. Remove the 4 buffers
2. Remove the 2 couplers
3. Remove the 2 "chasse-pierres"
4. Remove 2 small parts in the center of the engine
5. Spread the sides of the body to separate it from the chassis

One thing to add is about putting the model back together. There are two holes on each side of the body which is where the decoder holder under the chassis should go back:

How to open a I11 head passenger car from LS Models

 

Here's the video:

Digitization of a I11 pilot car from LS Models - part 1

 

I purchased a set of 3 passenger cars type I11 of the SNCB from LS Models with reference 43047. It's a great set as it contains the pilot car.

The pilot car can receive a decoder to control the lights. This is what I want to do, as well as adding interior lighting with figurines.

Opening the I11 pilot car

The instructions (fig 3) only indicate to take the sides of the body from the back and then lift it towards the front of the car.

 

It didn't come apart as easily. I used my usual method of sliding fine plastic pieces, starting around the bogies:

I ended up putting many plastic cards:

I eventually managed to open the car, but I made some small damages:

I will have to glue back those footboards

I'm not quite sure how critical those are

I will make a video on how to properly open this type of car, but certainly DO NOT slide the plastic cards across the entire body as I'm sure this is how I broke those tiny blue strings of plastic.

Digitizing the I11 pilot car

The instructions (fig 4) for the decoder are quite simple. 

1- Remove the connector to the body:

2- Remove the support of the head light module:

3- Remove the dummy decoder and put the DCC one. I took a ESU LokPilot 54615:

And voilà! It does not fit at all ... 🤦

As it turns out, ESU has decoders specifically for this type of use. They are function decoders, meaning that they cannot control a motor, but are designed to control lighting. There is a suite of such decoders: LokPilot 5 Fx

 I've just ordered a couple of those. So, there will be a part 2 on this subject. Stay tuned!

How to open a G1206 from Piko

 

Here's the video:

How to open a BB 60000 from Piko

 

Here's the video:

How to open a AM08 Desiro railcar from Van Biervliet

 

I made a new video on how to open a AM08 Desiro railcar from Van Biervliet. 

AM08 Desiro

Before we get to that, I'm adding here several videos from the actual railcar:

Van Biervliet

Van Biervliet released only two models. According to Wikipedia, some railcars are equipped for 25kV and can cross the borders into France and Luxembourg.

So, here's how to open this model:

How to open RIO cars from Lima

 

A new video on how to open RIO cars from Lima:

How to open a BB 22200 from LS Models

 

I'm starting a series of videos on how to open engines and I'll make those videos public on YouTube. Hopefully, it will help others: