Following part 1, I brought my setup to the layout and tried it out:
This is the output I get:
19:50:11.330 -> Bit Count/4 sec=23723 (Zeros=9326, Ones=14397), Glitches=0
19:50:11.367 -> Valid Packets=394, NMRA out of spec=41, Checksum Errors=4, Lost pkts=0, Long pkts=3
19:50:11.367 -> 0 half-bit length (us): 123.2 (96-1200) delta < 1100
19:50:11.367 -> 1 half-bit length (us): 57.7 (36-68) delta < 12
19:50:11.367 -> --
19:50:11.631 -> Loc 1087 F20-F13 0 11000100 00111111 11011110 00000000
19:50:11.631 -> Loc 7689 L F4-F1 0 11011110 00001001 10000000
19:50:11.631 -> Idle 11111111 00000000
19:50:11.631 -> Loc 7689 Fwd128 Stop 11011110 00001001 00111111 10000000
19:50:11.631 -> Loc 1087 L F4-F1 10000 11000100 00111111 10010000
19:50:11.631 -> Loc 1087 Fwd128 65 11000100 00111111 00111111 11000010
19:50:11.667 -> Loc 7689 F20-F13 0 11011110 00001001 11011110 00000000
19:50:11.667 -> Loc 1087 F28-F21 0 11000100 00111111 11011111 00000000
19:50:11.701 -> Loc 10000 Stop 11100111 00010000 01100000
19:50:11.741 -> Loc 1087 F36-F29 0 11000100 00111111 11011000 00000000
19:50:11.780 -> Loc 7689 F12-F9 0 11011110 00001001 10100000
19:50:12.041 -> Loc 1087 F8-F5 0 11000100 00111111 10110000
19:50:12.105 -> Loc 7689 F8-F5 0 11011110 00001001 10110000
19:50:12.139 -> Loc 1087 F12-F9 0 11000100 00111111 10100000
19:50:12.442 -> Loc 7689 F28-F21 1 11011110 00001001 11011111 00000001
19:50:15.651 -> -
So, we see a lot of things. It seems that there's a memory in what has been transmitted recently - typically everything related to the engine I ran right before - Loc 7689, but nothing about blocks or Railcom related information
More investigation required, but looking at DCC-EX Discord, it seems that EX-DCCInspector might not be supporting Railcom just yet.